Professional sales of advanced water purifier sensors

Product description

Water purifier common faults and diagnosis: water inlet, water outlet connection leakage phenomenon: check whether the water purifier water inlet, water outlet connection is wrapped with raw material belt, raw material belt is evenly wrapped. High pressure pump does not stop. The pressure of the high pressure pump is insufficient and cannot reach the set pressure. The high pressure switch is faulty and cannot take off. Check valve is blocked, pure water is not discharged (wastewater is not pure water). Specializing in the manufacture of Water Purifier Pressure Sensor. The solenoid valve is faulty and cannot be opened effectively. Pre-filter element or reverse osmosis membrane blocked, computer case control failure. High pressure pump shut down, but the wastewater did not stop. The solenoid valve is faulty and cannot effectively cut off water. The computer case is faulty and the solenoid valve cannot be closed (refer to microcomputer type). Check valve pressure relief (small wastewater flow). The raw water pressure is greater than the pressure set by the high pressure switch. Please adjust the raw water pressure and check whether the inlet solenoid valve cannot operate. If it cannot operate, please replace it. When the water is full, the machine jumps repeatedly. Raw water pressure is insufficient. Specializing in the manufacture of water purifier Pressure Sensor. Specializing in the manufacture of gas differential Pressure Transmitter, Oil Pressure Sensor, Water Pressure Sensor, air compressor pressure transmitter, wall mounted furnace pressure sensor, water purifier pressure sensor, high precision pressure sensor, etc.