Product description
Water purification equipment is used in many industries. The most important thing is to rely on the booster pump to make the water smoothly into the reverse osmosis membrane for deep purification. And purified water equipment engineering is widely used by us: drinking water, chemical, medical, breeding, planting, food, beverage and so on. But this is usually caused by high pressure. Reasons for high pressure of water purification equipment and solutions :(1) Improper adjustment of high pressure pump outlet door. (2) The pipeline between the high pressure pump and the reverse osmosis device is blocked. (3) The concentrated water regulating door is closed too tight or blocked, and the concentrated water discharge flow is small. (4) Low recovery rate. When the water pressure is high,? Timely check the water inlet valve, pipeline blockage, centralized water transfer and other factors, and take appropriate measures to solve the problem. Common solutions are as follows :1. Procedure The water valve is blocked. Adjust the concentration water pressure and water production pressure by increasing the upstream treatment water pressure 2 according to the RO water inlet stop valve. Unscrew the high pressure pump outlet valve and RO inlet valve, or unscrew the needle valve on the center pipe. Specializing in the manufacture of Refrigerant Pressure Sensor, common Rail Pressure Sensor, Water Purifier Pressure Sensor, injection molding machine special Pressure Transmitter, Urea Pressure Sensor, air conditioning pressure transmitter, etc.