Ten years professional manufacturing urea pressure sensor

Product description

Urea tanks are installed with urea level and temperature sensors, which are generally synthesized together. Urea bright reasons :1, after the failure of urea crystallization, exhaust pipe storage of a large number of urea, not only cause engine exhaust plugging fatigue, but also cause excessive emissions, several driving cycles after OBD limit torsion. The main reason is the unqualified quality of urea. 2. The temperature in the urea box is too high, resulting in volatilization of urea after the exhaust hole is discharged, and crystallization around the urea tank. Too much crystallization in the vent causes the vent to be blocked. When the urea system is working, the vacuum in the tank is serious, and the urea pressure is blocked, resulting in too low urea pressure. 3. Use the diagnostic instrument to read the fault code as follows: high voltage signal of the Pressure Sensor of the urea pump, short circuit of the actuator, open circuit of the actuator of the urea reversing valve, incorrect power supply of the sensor. Specializing in the manufacture of water pump Pressure Transmitter, Gas Pressure Sensor, Oil Pressure Sensor, Water Pressure Sensor, air compressor pressure transmitter, wall mounted furnace pressure sensor, high precision pressure sensor, etc.