Urea pressure sensor with High quality small volume

Product description

Urea is a kind of diesel exhaust treatment liquid which uses SCR selective catalytic reduction technology to reduce nitrogen oxides in diesel exhaust. If the car urea is insufficient or the SCR system fails, the car will show symptoms such as insufficient acceleration, unable to move the accelerator, insufficient power, and accelerated engine acceleration. If the fault indicator is on. Underpower, torque limit 1800 RPM. SCR system is not working properly, urea consumption is too high or too low. The diagnostic instrument can read the fault code for urea pump Pressure Sensor voltage signal high, actuator 2 to ground short circuit, urea reversing valve actuator open, sensor power supply 3 error. The power module of the urea pump is seriously corroded. The power harness is powered on and sends an incorrect voltage signal to the ECU. Solution: Replace the plug and power module of the urea pump. The urea fault code can be cleared after retesting after installation. Only sensor power 3 cannot be cleared. Analyze the sensor power supply. 3 Indicates the internal power module of the ECU. Replace the guide Rail Pressure Sensor. Specializing in the manufacture of common rail Pressure Transmitter, hydraulic pressure sensor, Water Pressure Sensor, CNG/LPG High Pressure Sensor, water purifier pressure transmitter, Urea Pressure Sensor, etc.