High quality CNG/LPG High Pressure Sensor

Product description

The intake sensor of natural gas engine is used to detect the intake pressure, because the size of the intake pressure will have a great impact on the fuel fit. By measuring the pressure and temperature after intercooling, combined with the engine speed, displacement and inflation efficiency, the mixture flow rate was calculated by the velocity density method. According to the requirements of the parts, it is installed on the intake pipe downstream of the electronic throttle. During installation, the sensor temperature and pressure probe should be placed in the mixed air flow as far as possible to measure the correct value. The vacuum change in the intake manifold is detected according to the engine speed and load, and the change in the resistance inside the sensor is converted into a signal voltage, which is sent to the engine control unit (ECU). ECU controls and corrects fuel injection and ignition timing Angle according to signal voltage. The intake Pressure Sensor is located above the intake manifold of the engine. The intake pressure temperature sensor should be installed on the car's intake manifold, above the intake manifold, to prevent water accumulation. Specializing in the manufacture of brake Pressure Transmitter, hydraulic pressure sensor, Water Pressure Sensor, CNG/LPG High Pressure Sensor, Refrigerant Pressure Sensor.