Digital compensation technology wall mounted furnace sensor

Product description

Wall mounted furnace Water Pressure Sensor may fail. Valve or filter is blocked. Valves need to be cleaned or replaced. The spool is not flexible, the valve can not be closed, resulting in the wall hanging furnace can not work. You can check whether the spool is clogged with debris or replace it with a new filter. Because, if the wall mounted furnace valve or filter is blocked, resulting in normal work, need to be cleaned. In addition, if there is water leakage, there may be a fault inside the wall hanging furnace, and new parts need to be replaced. The pipe is faulty or the pipe memory is flooded or contaminated. Under normal circumstances, this situation may be caused by the excessive hot water flow in the operation of the wall hanging furnace, and the poor water yield of the wall hanging furnace due to the large scale in the pipeline. At this point, you can open the drain valve, the water out, and then send hot water into the pipe. At the same time, if the wall-mounted furnace fails to start, it is recommended to replace the gas-fired wall-mounted furnace and continue to use it after confirming that the wall-mounted furnace works normally. Specializing in the production of wall mounted boiler Pressure Transmitter, intake manifold absolute pressure sensor, common Rail Pressure Sensor, engineering hydraulic sensor, injection molding machine special Pressure Sensor, Urea Pressure Sensor, etc.