YN52S00102P1High quality excavator accessory pressure sensor

Product description

There are two kinds of hydraulic system, namely open center system and closed center system. An open center system is one in which there is fluid flow but no pressure in the system when the actuator is idling. The pump circulates fluid from the reservoir, through the selector valve, and back to the reservoir. An open central system can use any number of subsystems, each with a selection valve. Selector valves for open-core systems are usually in series. In this arrangement, system pressure lines pass through each selector valve. Fluid is always allowed to pass freely through each selector valve and back into the reservoir until one of the selector valves is positioned to operate the mechanism. When one of the selector valves is positioned to operate the actuator, fluid is transferred from the pump to the actuator through one of the working lines. The hydraulic system consists of many components to ensure its normal operation. Regardless of the function and design of the hydraulic system, the number of basic components is minimal. The main components of the hydraulic system are hydraulic pump, hydraulic oil storage tank, filter, actuator, accumulator, direction control valve, flow control valve, pressure relief valve, Hydraulic High Pressure Sensor and pipeline and accessories. Specializing in the production of common Rail Pressure Sensor, hydraulic pressure sensor, air compressor Pressure Transmitter, Water Pressure Sensor, refrigerant pressure transmitter, Water Pump Pressure Sensor, etc.