Impact resistance LC52S00015P1 excavator hydraulic sensor

Product description

Kobelco excavator hydraulic system common fault repair. Hydraulic system maintenance. Filter or change the oil; Cleaning screen, filter element or replacement: cleaning inside or outside the tank; Replace the seal at the valve plate connection; Tighten the gland, joint and flange screws; Replacement of flattened pipes; Eliminate the obvious parts of the leakage; Electromagnet, pressure relay, travel switch and other electrical wiring is good. There are many kinds of hydraulic equipment. As the role and requirements of the system are different, the hydraulic components used are also different, so the failure of the system is also varied. Even the system or hydraulic components of the same type of equipment, due to the different conditions of use and maintenance, the failure is not the same. Analyzing the cause of a fault is basically the same as troubleshooting a fault. Excavator hydraulic system repair: hydraulic cylinder to replace seals and wearing parts, such as can not be repaired should be replaced in complete sets. Valves should be cleaned and replaced with seals, springs and other wearing parts. Hydraulic pump should be maintained, after maintenance and test, the main technical performance indicators of the pump to meet the requirements, can continue to use. The performance of the old pressure gauge should be measured and corrected. If the quality index is not good, should be replaced with a new pressure gauge. Pressure gauge switch to realize sensitive adjustment, safe and reliable. Pipelines should be cleaned, smooth pipelines should be replaced, and pipelines with obvious pitting points should not be used. Pipelines should be neatly arranged and equipped with pipe clamps. Specializing in the production of hydraulic high Pressure Transmitter, Water Pressure Sensor, water pump pressure transmitter, Urea Pressure Sensor, intake manifold absolute pressure sensor, hydrogen energy pressure transmitter.