Practical high precision hydraulic sensor E2549-02-1-JL

Product description

The engineering Hydraulic High Pressure Sensor connection steps are generally as follows: firstly hang the hydraulic sensor above the detection target, then open the upper cover of the sensor, and connect the external lead of the hydraulic sensor to the terminal power interface. The terminal power positive interface and the terminal power negative interface, which is why the name is so strange, they correspond to the positive and negative terminals. The ground pair of the terminal power supply should be grounded to divert the current to the ground. Overspeed terminals are used to connect controllers. Common terminals are usually connected to a 1000 ohm resistor inside the terminal line. One thing to note is that before wiring, a 22k resistor is connected in parallel between ports 1 and 3. The remaining two output ports can be used as contacts, which the user can choose freely. Specializing in the manufacture of intake manifold absolute pressure sensor, common Rail Pressure Sensor, engineering hydraulic sensor, injection molding machine special Pressure Sensor, Urea Pressure Sensor, Brake Pressure Sensor, Refrigerant Pressure Sensor, gas high pressure sensor, Water Pump Pressure Sensor, gas pressure difference sensor, etc.